Power Quick Power Forge
Lubricant, Rust Inhibitor and Drying Aid
Dilution
Promotes drying of medical instruments and provides excellent lubrication preventing water spots caused by mineral residue.
-
Concentrated and cost-effective.
-
Leaves a protective finish on instrument surface, improving abrasion and wear resistance.
-
Excellent anti-corrosive effect.
-
Promotes drying of instruments, reducing drying time and increasing efficiency.
-
Forms a uniform film on instrument surfaces thereby preventing water spots.
-
All the ingredients are carefully selected in such a way that they minimize residual toxicity.
-
Low foaming and can be used for ultrasonic cleaning.
Product Specifications
-
Cleaning method:
Soaking, jet cleaning
-
pH:
Neutral
-
Dilution rate:
0.5% (50mL per 10L of water)
-
Foaming:
Low foaming
-
Rinse:
Unnecessary
-
Compatibility:
Stainless steel, copper, brass and aluminum
Frequently Asked Questions
-
How to use:
Manual Immersion
1. Prepare a dilution in a covered container.
- Recommended concentration for use is 0.5% (50mL/10L of water).
2. Immerse medical instruments in the dilution for about 30 seconds.
3. Drain the instruments well and dry thoroughly.Jet Cleaning
1. Connect the suction hose of a jet washer to the product.
- Recommended concentration for use is 0.5% (50mL/10L of water).
2. Operate the jet washer according to the manufacture's instructions.